Voorbeeld van port.sys die ik gebruik voor pi8lap
# BBS port.sys # # Number of Com Ports (not including Com 0) and TNCs 3 10 # # Interface 7 = TCPIP # Interface 9 = LINUX # #Com Interface Adress (Hex) Baud 1 9 0 115200 2 9 189C 0 3 9 189D:189E:77 0 # # Maxframe: The maximum number of frames the TNC will send at a time. # NbFwd : Number of channels for OUTGOING forward at the same time. # MxBloc : Size of forward-block in Kb. # # M/P-Fwd : Minute of the hour for start of forward, and period # (how many minutes between each forward-start). # Mode : One of these: # B : BBS-mode. # G : "Guest"-mode. # U : Normal-mode. # Type host-mode, one of these: # D : WA8DED # K : KAM hostmode. # M : Telephone-modem. # P : PK-232 # Q : BPQ v 4.x # Addition: One of these letters can be used too: # L : Send unproto beacon after each arriving mail. # Y : Yapp allowed on this QRG. # W : Gateway allowed TO this QRG. # R : Read-Only acces. # E : Recommanded by JP F6FBB # # Freq. : Text to describe this port (max 9 characters, no space) # Same number of lines as number of TNCs. # #TNC NbCh Com MultCh Pacln Maxfr NbFwd MxBloc M/P-Fwd Mode Freq 0 0 0 0 0 0 0 0 00/01 ---- File-fwd. 1 4 1 ax0 128 4 2 10 15/60 XULWY 144.850 2 4 1 ax1 128 4 2 10 15/60 XULWY 430.950 3 4 1 ax2 128 4 2 10 15/60 XULWY Node 4 10 2 0 250 7 4 10 15/15 TUY Telnet 5 10 1 nr1 250 4 2 10 30/15 XUWY NetRom 6 10 3 0 250 7 4 10 00/10 SU Pop/smtp 7 10 1 rose0 250 4 4 10 30/15 XUWY Rose 8 10 1 ax4 250 4 4 10 30/15 XUWY Axudp 9 10 1 ax5 250 4 4 10 30/15 XUWY Axip 10 10 1 ax6 250 4 4 10 30/15 XUWY Jnos # # Special callsigns and modes for some channels # TNC Nbs Callsign-SSID Mode # 1 2 XXXXX-1 B # # End of file