Libor OK2PEN and I were talking about openBCM. I was getting very intrested in openBCM. Now I would like to run this on my Raspberry PI. I have a number of versions of openBCM but that is for an i386 system. So I went into the evil world and searched for openBCM for the Raspberry (ARM processor). I came on the github website of OE5HPM he has ported it to ARMv6 / ARMv7hf
https://github.com/oe5hpm/openBCM/releases
So let’s go
cd /home/pd9q git clone https://github.com/oe5hpm/openBCM cd openBCM make cd out-x86_32 mkdir /home/pd9q/bcm cp bcm /home/pd9q/bcm cd bcm ./bcm
OpenBCM V1.08-3-g9b42 (Linux)(c) GNU GPL 1992-2013 F. Radlherr, DL8MBT et al. OpenBCM is maintained by Markus Baumann, DH8YMB 15.11.18 20:58:30z SYSTEM: #R working dir: '/home/pd9q/bcm' 15.11.18 20:58:30z SYSTEM: #R l1axip: 127.0.0.1 rxport=4866 txport=4867 15.11.18 20:58:30z SYSTEM: #R l1axip: initialised to channel 0 15.11.18 20:58:30z SYSTEM: #L Start: V1.08-3-g9b42 Linux mem 891400kB hd 11912MB 15.11.18 20:58:30z SYSTEM: #R init_tnc: 200 ports 15.11.18 20:58:30z SYSTEM: #R ax25k_init: Kernel AX25 disabled 15.11.18 20:58:30z SYSTEM: #R initfwdlist: 0 partners, 0 destinations 15.11.18 20:58:30z SYSTEM: #R readtree: 0 bulletins 15.11.18 20:58:30z SYSTEM: #R telnetd: initialised to port 4719 15.11.18 20:58:30z SYSTEM: #R httpd: initialised to port 8080 15.11.18 20:58:30z SYSTEM: #R ftpd: initialised to port 8021 15.11.18 20:58:30z SYSTEM: #R sendmail: initialised to port 8025 15.11.18 20:58:30z SYSTEM: #R popper: initialised to port 8110 15.11.18 20:58:30z SYSTEM: #R nntpd: initialised to port 8119 15.11.18 20:58:30z SYSTEM: #R radiod: radio connectivity disabled 15.11.18 20:58:30z SYSTEM: #R serv: initialised to port 8123 15.11.18 20:58:31z SYSTEM: #R mbcron: started
Date: 15.11.2018 21:36:51z OpenBCM V1.08-3-g9b42 (Linux) (c) GNU GPL 1992-2013 F. Radlherr, DL8MBT et al. OpenBCM is maintained by Markus Baumann, DH8YMB https://github.com/oe5hpm/openbcm Compiled Nov 15 2018 15:15:28 with GCC 6.3.0 20170516 and support for: filesurf mailserver pocsagserver servif radioif mdpw serial guest ax25k autofwd runutils macro yapp filefwd telnetfwd didadit userLT fwd-edit rej-edit conv-edit extract fbbcheckmode users4convert fts oldmailimport linuxsystemuser Uptime: 00:38 CPU: ARMv7 BogoMips: 57.60 OS: Linux version 4.14.71-v7+ PR-Interface: OpenBCM-L2 200 ports, Linux Kernel AX25 Available Memory / Used Swap : 885608 kB / 0 kB Info-Path: /home/pd9q/bcm/info : 11912 MB (14496 MB) User-Path: /home/pd9q/bcm/user : 11912 MB (14496 MB) BCM-Home: /home/pd9q/bcm : 11912 MB (14496 MB) Filesurf: not defined
Now I have to figure out how to configure it.