Installeer DxSpider op Debian Wheezy

# Install Dx-Cluster

sudo apt-get install wget
sudo apt-get install git-core
sudo groupadd spider
sudo useradd -m sysop -G spider
sudo usermod -g spider sysop
sudo passwd sysop
sudo adduser sysop sudo

# Perl modules
sudo apt-get install libtimedate-perl
sudo apt-get install libnet-telnet-perl
sudo apt-get install libcurses-perl
sudo apt-get install libdigest-sha-perl
sudo apt-get install libdata-dumper-simple-perl

sudo su
cd ~sysop
ln -s /home/sysop/spider /spider
shutdown -r now

After restart login as sysop
cd ~
mkdir spider
git clone git://
cp -a /home/sysop/ /spider
rm -rf
cd /spider
git reset –hard
sudo su
cd /home/sysop/
chown -R sysop.spider spider
find . -type d -exec chmod 2775 {} ;
find . -type f -exec chmod 775 {} ;
cd /spider
mkdir local
mkdir local_cmd
cp perl/ local/
cp perl/ local/
cd local
– edit following the instructions in the comments
– edit to remove “#” from the line for the port, and add additional ports as needed:
@listen = (
[“”, 7300],

cd /spider/perl/
cd /tmp
# The next step can take a few minutes
/spider/perl/ /tmp/usdbraw.gz
cd /spider/src
cd /spider/perl
# on a separate ssh or system console, log into the system as sysop
# from the command line of the console enter:
load/usdb # US database ?

# Edit /etc/inittab to add the following two lines at the end of the file.
##Start DXSpider on bootup and respawn it should it crash
DX:2345:respawn:/bin/su -c “/usr/bin/perl -w /spider/perl/” sysop >/dev/tty6

Add a line to /etc/services and /etc/inetd.conf for spider

# Local services
bpqspider 7400/tcp # BPQ to Spider Link


sudo apt-get install openbsd-inetd

bpqspider stream tcp nowait sysop /spider/src/client client login ax25

Restart inetd – sudo killall -1 inetd