Example for a Kiss port
PORT
PORTNUM=1 ; Optional but sets port number if stated
ID=BPQ 144.850MHZ ; Displayed by PORTS command
TYPE=ASYNC ; Port is RS232 Com
PROTOCOL=KISS ; TNC is used in KISS,or BPQKISS mode
COMPORT=/dev/ttyUSB0 ; Comport
SPEED=9600 ; RS232 COM PORT SPEED
CHANNEL=A ; A single channel TNC, A or B for multichannel
NOKEEPALIVES=0
PERSIST=160 ; PERSIST=256/(# of transmitters-1)
SLOTTIME=180 ; CMSA interval timer in milliseconds
TXDELAY=270 ; Transmit keyup delay in milliseconds
TXTAIL=23 ; TX key down, in milliseconds, at packet end
QUALITY=203 ; Quality factor applied to node broadcasts
MINQUAL=201 ; Entries in the nodes table with qualities
; greater or equal to MINQUAL will be sent on
; this port. A value of 0 sends everything.
MAXFRAME=6 ; Max outstanding frames (1 thru 7)
FRACK=5000 ; Level 2 timout in milliseconds
RESPTIME=1000 ; Level 2 delayed ack timer in milliseconds
RETRIES=100 ; Level 2 maximum retry value
PACLEN=236 ; Default max packet length for this port
UNPROTO=NOCALL ; BTEXT broadcast addrs format:
; DEST[,digi1[,digi2]]
BCALL=NOCALL ; BTEXT call. unstated defaults to APPL1CALL
L3ONLY=0 ; 1=No user downlink connects on this port
DIGIFLAG=1 ; Digipeat: 0=OFF, 1=ALL, 255=UI Only
DIGIPORT=0 ; Port on which to send digi'd frames
USERS=0 ; Maximum number of L2 sessions, 0 = no limit
ENDPORT