SCS released PMOM

Posted onAuthorPD9QLeave a comment

Not sure if people saw this but SCS has released a program to monitor Pactor 1/2/3 transmissions even with B2F/LZHUF-compressed messages for the Raspberry Pi: 

https://www.p4dragon.com/en/PMON.html

David emailed them to see if they plan on releasing X86 versions and possibly packages for other distros like Ubuntu, Fedora, etc.  We’ll see what they say but this looks pretty cool!

Reaction of scs
—
Thank you for your inquiry.
Currently there is no plan to release PMON for other systems than Raspberry Pi. As also stated on the PMON web site, PACTOR-4 will follow in early 2020.
—

Thanks to David “Dranch”

BPQ32 Example SCS Tracker (1k2 packet) port

Posted onAuthorPD9QLeave a comment

Example for a SCS Tracker with 1k2 packet port.

PORT
    PORTNUM=1
    ID=VHF 2m Port
    COMPORT=/dev/ttyUSB0       ;COM Port Address
    SPEED=38400                ;COM Port Speed
    DRIVER=TRKMULTI
 
    QUALITY=0                  ;Setting to 0 stops node broadcasts on this port
    MINQUAL=168
 
    MHEARD=N
    PACLEN=128                 ;Max = 236 if using NETROM links
     
    CONFIG                     ;Driver-Specific Configuration
    ;DEBUGLOG 1
    PACKETCHANNELS 5           ;Limit to 5 simultaneous connections
    R 0                        ;Digipeating OFF
    F 500                      ;T1 - FRACK: in 10mS steps.
    @T2 0                      ;T2 - RESPDELAYTIME: in 10mS steps.
    @T3 18000                  ;T3 - Sign of life timer in 10mS steps
    N 10                       ;RETRY: Setting to 10
    O 7                        ;MAXFRAME: Setting to 7
    T 50                       ;TXDELAY: Setting to 1/2 second (50 * 10ms)
    P 32                       ;Persistence (p) (default 32)
    W 10                       ;Slottime in milliconds (default 10)
    %N 0                       ;TXTAIL - in 10ms increments.
    ; Comment out the desired speed.
    %B 1200            ;1200 is the poweron default, but setting it anyway.
    %F 2000            ;I assume this has no effect on 1200 mode, but setting anyway..
    %XA 880            ;Set 300/1200 output amplitude to 3 kHz Peak deviation per measurement.
    %XF 1600           ;Set 9600/19k2 output amplitude to 400 mV PP per ID-880H manual.
    %E 2               ;Set lower tone in 1200 mode (fw 1.5s) to 1/2 voltage 6 dB down from high.
ENDPORT

 

BPQ32 Example SCS Tracker (robust packet) port

Posted onAuthorPD9QLeave a comment

Example SCS Tracker with Robust packet port

PORT
    PORTNUM=1
    ID=HF 30m Port
    COMPORT=/dev/ttyUSB0     ;COM Port Address
    SPEED=38400              ;COM Port Speed
    DRIVER=TRKMULTI
 
    QUALITY=0                ;Setting to 0 stops node broadcasts on this port
    MINQUAL=168
 
    MHEARD=N
    
    PACLEN=200               ;Max = 236 if using NETROM links
     
    CONFIG                   ;Driver-Specific Configuration
    ;DEBUGLOG 1
    PACKETCHANNELS 5         ;Limit to 5 simultaneous connections
    R 0                      ;Digipeating OFF
    F 600                    ;T1 - FRACK: in 10mS steps.
    @T2 0                    ;T2 - RESPDELAYTIME: in 10mS steps.
    @T3 30000                ;T3 - Sign of life timer in 10mS steps
    N 10                     ;RETRY: Setting to 10
    O 7                      ;MAXFRAME
    T 25                     ;TXDELAY: Setting to 1/4 second (25 * 10ms)
    P 32                     ;PERSISTENCE (p) (default 32 of 255)
    W 10                     ;Slottime in milliconds (default 10)
    %N 0                     ;TXTAIL - in 10ms increments.
    ; Comment out the desired speed.
    %B R300              ;1200 is the poweron default, so setting to R300
    %L 1500              ;For RPR only. Lately required since this doesn`t always default to 1500.
    %XR 900              ;Set RPR output amplitude in mV for TS-480 Menu #40 = 1.
   
ENDPORT

 

BPQ32 Example Soundmodem port

Posted onAuthorPD9QLeave a comment

Example for a UZ7HO soundmodem port

PORT
 ID=UZ7HO
 DRIVER=UZ7HO
 
 CHANNEL=A
 QUALITY=0
 MAXFRAME=4
 FULLDUP=0
 FRACK=8000
 RESPTIME=3000
 RETRIES=10
 PACLEN=128
 TXDELAY=200
 SLOTTIME=100
 PERSIST=64
 KISSOPTIONS=ACKMODE
 
CONFIG
 ADDR 127.0.0.1 8100 PATH C:\RMS Express\soundmodem.exe
 MAXSESSIONS=4
ENDPORT

 

BPQ32 Example ARDOP port

Posted onAuthorPD9QLeave a comment

Example for a Ardop port

PORT
 PORTNUM=1
 ID=ARDOP
 DRIVER=ARDOP
 INTERLOCK=4
CONFIG
 ADDR 127.0.0.1 8400 PTT CI-V PATH C:\RMS Express\ARDOP_Win.exe
 CAPTURE IC-7300 (USB Audio Codec)
 PLAYBACK IC-7300 (USB Audio Codec)
 LISTEN TRUE
 CWID True
 CMDTRACE True
 DEBUGLOG True
 DRIVELEVEL 100
 GRIDSQUARE JO11VN
 MAXCONREQ 12
 PROTOCOLMODE ARQ
 TUNERANGE 200
 ARQBW 2000MAX
 ARQTIMEOUT 60
 MONITOR TRUE
 Squelch 1
 SENDID 5
 FECREPEATS 3
ENDPORT

 

BPQ32 Example Winmor port

Posted onAuthorPD9QLeave a comment

Example for a Winmor port

PORT
 PORTNUM=5
 ID=WINMOR
 DRIVER=WINMOR
 INTERLOCK=4
CONFIG
 ADDR 127.0.0.1 8500 PTT CI-V PATH C:\RMS Express\WINMOR TNC.exe
 CAPTURE IC-7300 (USB Audio Codec)
 PLAYBACK IC-7300 (USB Audio Codec)
 LISTEN TRUE
 CWID True
 DEBUGLOG True
 BW 1600
 DRIVELEVEL 100
 MODE Auto
 ROBUST False
 SHOW False
 BUSYLOCK False
ENDPORT

 

BPQ32 Example AXIP port

Posted onAuthorPD9QLeave a comment

Example for a AXIP port

PORT
 PORTNUM=1
 ID=AX/IP/UDP 
 DRIVER=BPQAXIP        ; Uses BPQAXIP.DLL
 QUALITY=200           ; Quality factor applied to node broadcasts heard on
                       ; this port, unless overridden by a locked route
                       ; entry. Setting to 0 stops node broadcasts
 MINQUAL=0             ; Entries in the nodes table with qualities greater or
                       ; equal to MINQUAL will be sent on this port. A value
                       ; of 0 sends everything.
 MAXFRAME=7            ; Max outstanding frames (1 thru 7)
 FRACK=7000            ; Level 2 timout in milliseconds
 RESPTIME=1000         ; Level 2 delayed ack timer in milliseconds
 RETRIES=10            ; Level 2 maximum retry value
 UNPROTO=ID            ; BTEXT broadcast addrs format: DEST[,digi1[,digi2]]
 BCALL=NOCALL          ; BTEXT call. unstated defaults to APPL1CALL
CONFIG
 UDP 10093             ;Listens for UDP packets on this UDP port number
 UDP 10092
 MHEARD ON
; AUTOADDMAP
 BROADCAST NODES
 BROADCAST ID
 
 MAP CALL IP-ADDRESS UDP 10093 B
   
ENDPORT

 

BPQ32 Example Telnet port

Posted onAuthorPD9QLeave a comment

Example for a Telnet port

PORT
 PORTNUM=2
 ID=Telnet
 DRIVER=Telnet
 QUALITY=0
CONFIG
 CMS=1
 CMSCALL=NOCALL
 CMSPASS=****************
 RELAYAPPL=BBS
 LOGGING=1
 DisconnectOnClose=1
 TCPPORT=8010
 FBBPORT=8011
 HTTPPORT=8012
 LOGINPROMPT=user:
 PASSWORDPROMPT=password:
 MAXSESSIONS=15
 CTEXT=Welcome to NOCALL's Telnet Server\nEnter ? for list of commands\n\n
 
 USER=user,passwd,CALL,"",sysop
ENDPORT