After running BPQ32 for years, I needed something to get the fire going again. I chose Xrouter. Below are some configuration examples of Xrouter. These are small steps.
This line (!ddmm.mmN/dddmm.mmE) but then with “” was killing my wordpress website 🙂 There is always something.
# XROUTER.CFG - Main Configuration file for XRPi / XRLin
#===================================================================
#
# Primary Identity for AX25 NetRom.
#
NODECALL=PI1LAP-7
NODEALIAS=NDRLND
PMSALIAS=LAPBBS
PMSCALL=PI8LAP
PMSQUAL=255
PMSTYPE=4
PMSHADDR=.#ZLD.NLD.EURO
#
#
# QTH specifies where the node is located.
#
QTH=Kortgene, JO11VN
#
#
# Callsign for console operations. You can set this independently
# of NODECALL or you may set them the same. You may at any time
# override this callsign using the "linked as" command.
#
CONSOLECALL=PD9Q
#
#
# Chat server callsign. This may be the same as the nodecall, but
# must use a different SSID, preferably -8.
#
CHATCALL=PI1LAP-4
CHATALIAS=LAPCHT
CHATLINKS=+PE1NNZ-4,+PI1ZTM-2
CHATQUAL=255
CHATLOG=128
CHATPORT=3600
LOCATOR=JO11VN
IPADDRESS=44.137.31.68
DOMAIN=ampr.org
HOSTNAME=linux.pd9q.ampr.org
DNS=44.137.0.1
HTTPPORT=1080 1080
HTTPROOT=/home/pd9q/HTTP
RLOGINPORT=1013 0
POP3PORT=110 110
TELNETPORT=6023
MQTTPORT=1883
LOG=32555
CONTACT=pd9q(@)packet-radio.net
MAPCOMMENT=XRLin (XRouter for 64bit Linux) test node
#
CTFLAGS=2
SORTBYCALL=1
AGWPORT=8001
# Hamlib
RADIO=1
NAME=ICOM 7300
TYPE=6
COM=44.137.31.75:4532
ENDRADIO
CTEXT
PI1LAP-7 AX25/IP Router
Type ? for list of commands.
***
#
#
# This text is the response to the 'I' command
#
INFOTEXT
XRLin Packet Router, Kortgene, NL, JO11VN
***
#
# This ID message is sent every IDINTERVAL.
# Only the first line is sent.
# If your APRS-format static position code is included, starting
# within the first 40 characters, you will be visible on APRS maps
# and the MHeard function will record distances to heard stations.
# The format is (!ddmm.mmN/dddmm.mmE) where dd represents degrees
# of latitude/longitude and mm.mm represents minutes to two decimal
# places. "N" and "E" may be replaced by "S" and "W"
# as appropriate.
#
#5133.52N/00348.15E
IDTEXT
!5133.52N/00348.15E PI1LAP-7 / PI8LAP
***
#
#
#
# =======================================================================
# Interface definitions - These MUST precede any port definitions
# =======================================================================
#
# Loopback interface
# Please note: This loopback is internal to XRouter only. It does NOT
# interface with Linux! It is purely for testing, and you should remove
# it once you are up and running, otherwise it WILL confuse you.
#
INTERFACE=1
TYPE=LOOPBACK
MTU=256
PROTOCOL=KISS
ENDINTERFACE
#
INTERFACE=2
ID=enp1s0
TYPE=EXTERNAL
PROTOCOL=ETHER
MTU=1064
ENDINTERFACE
INTERFACE=3
TYPE=TCP
ID=KISSTCP Direwolf
IOADDR=44.137.31.76
INTNUM=8001
PROTOCOL=KISS
KISSOPTIONS=NONE
MTU=1500
ENDINTERFACE
INTERFACE=4
TYPE=TCP
ID=KISSTCP QTSM
IOADDR=44.137.31.75
INTNUM=8100
PROTOCOL=KISS
KISSOPTIONS=NONE
MTU=1500
ENDINTERFACE
INTERFACE=5
ID=VARA Tests
TYPE=VARA
MTU=1500
RADIONUM=1
IOADDR=44.137.31.75
INTNUM=8300
CONFIG=MYCALL PI1LAP-7 PI8LAP PI1LAP-4 PI8LAP-10
CONFIG=BW500
CONFIG=LISTEN ON
CONFIG=P2P SESSION
ENDINTERFACE
INTERFACE=10
TYPE=AXUDP
MTU=256
ENDINTERFACE
#
# =====================================================================
# Port definitions. Each one begins with PORT and ends with ENDPORT
# =====================================================================
#
# Port "attached" to interface 1
PORT=1
ID=Loopback port
INTERFACENUM=1
ENDPORT
#
PORT=2
ID=Ethernet
INTERFACENUM=2
IPADDRESS=44.137.31.68
NETMASK=255.255.255.224
ENDPORT
PORT=3
ID=144.850Mhz 1k2
INTERFACENUM=3
CHANNEL=A
QUALITY=203
MINQUAL=201
MHEARD=25
BCAST=MAIL
BCFROM=PI8LAP
FREQUENCY=144850000 ; 144.925 MHz
ENDPORT
PORT=4
ID=AFSK 850Hz IL2P+CRC
INTERFACENUM=4
CHANNEL=A
MHEARD=25
NODESINTERVAL=0
QUALITY=0
PACLEN=80
RETRIES=10
RFBAUDS=300
BCAST=MAIL
BCFROM=PI8LAP
FREQUENCY=7049450
SESSLIMIT=2
USERS=2
IDTEXT=!5133.52N/00348.15E PI1LAP-7 / PI8LAP
ENDPORT
PORT=5
ID=AFSK 1000Hz
INTERFACENUM=4
CHANNEL=B
MHEARD=25
NODESINTERVAL=0
QUALITY=0
PACLEN=80
RETRIES=10
RFBAUDS=300
BCAST=MAIL
BCFROM=PI8LAP
FREQUENCY=7049450
SESSLIMIT=2
USERS=2
IDTEXT=!5133.52N/00348.15E PI1LAP-7 / PI8LAP
ENDPORT
PORT=6
ID=BFSK 2150Hz IL2P+CRC
INTERFACENUM=4
CHANNEL=C
MHEARD=25
NODESINTERVAL=0
QUALITY=0
PACLEN=80
RETRIES=10
RFBAUDS=300
BCAST=MAIL
BCFROM=PI8LAP
FREQUENCY=7049450
SESSLIMIT=2
USERS=2
IDTEXT=!5133.52N/00348.15E PI1LAP-7 / PI8LAP
ENDPORT
PORT=7
ID=VARA HF
INTERFACENUM=5
MHEARD=25
ENDPORT
PORT=8
ID=AXUDP LINK DK0WUE-7
INTERFACENUM=10
IPLINK=44.149.102.81
UDPLOCAL=10093
UDPREMOTE=10093
FRACK=2000
QUALITY=203
MINQUAL=201
MHEARD=25
BCAST=MAIL
BCFROM=PI8LAP
RESPTIME=200
RFBAUDS=56000
ENDPORT
PORT=10
ID=AXUDP LINK PA8F
INTERFACENUM=10
IPLINK=44.137.1.82
UDPLOCAL=10093
UDPREMOTE=10093
FRACK=2000
QUALITY=203
MINQUAL=201
MHEARD=25
BCAST=MAIL
BCFROM=PI8LAP
RESPTIME=200
RFBAUDS=56000
ENDPORT
PORT=11
ID=AXUDP LINK GB7BED
INTERFACENUM=10
IPLINK=gb7bed.packetnode.net
UDPLOCAL=10093
UDPREMOTE=10093
FRACK=2000
QUALITY=203
MINQUAL=201
MHEARD=25
BCAST=MAIL
BCFROM=PI8LAP
RESPTIME=200
RFBAUDS=56000
ENDPORT
PORT=12
ID=AXUDP LINK PI1ZTM
INTERFACENUM=10
IPLINK=44.137.2.174
UDPLOCAL=10093
UDPREMOTE=10093
FRACK=2000
QUALITY=203
MINQUAL=201
MHEARD=25
BCAST=MAIL
BCFROM=PI8LAP
RESPTIME=200
RFBAUDS=56000
ENDPORT
PORT=13
ID=AXUDP LINK PE1NNZ
INTERFACENUM=10
IPLINK=44.137.24.150
UDPLOCAL=10093
UDPREMOTE=10193
FRACK=2000
QUALITY=203
MINQUAL=201
MHEARD=25
BCAST=MAIL
BCFROM=PI8LAP
RESPTIME=200
RFBAUDS=56000
ENDPORT
PORT=15
ID=AXUDP LINK F8COD-2
INTERFACENUM=10
IPLINK=80.119.24.209
UDPLOCAL=10093
UDPREMOTE=10093
FRACK=2000
QUALITY=203
MINQUAL=201
MHEARD=25
BCAST=MAIL
BCFROM=PI8LAP
RESPTIME=200
RFBAUDS=56000
ENDPORT