Month: November 2017

Jnos network interface

Posted onAuthorPD9QLeave a comment

Setup a Jnos network Interface

attach tun tun0 1500 0
ifconfig tun0 ipaddress 44.137.31.67
ifconfig tun0 broadcast 44.137.31.95
ifconfig tun0 netmask 255.255.255.224
ifconfig tun0 mtu 1500
pause 2
shell ifconfig tun0 44.137.31.82 pointopoint 44.137.31.67 mtu 1500 up
pause 1
shell ip route add 44.137.31.67 dev tun0 table 44 src 44.137.31.82
shell echo 1 >/proc/sys/net/ipv4/ip_forward
pause 1
shell /usr/sbin/arp -i eth0 -Ds 44.137.31.67 eth0 pub

arp eaves tun0 on
arp poll tun0 on
arp maxq 10

ip hp tun0 on
route add default tun0 44.137.31.82

 

Linux commando “ps ax”

Posted onAuthorPD9QLeave a comment

 2604 ?        S      0:00 /usr/bin/perl /usr/local/sbin/rip44d -p passwd -t 44
 2609 tty3     Ss+    0:01 ./jnos -C -g2 -u3 -f nos.cfg -i
 2610 ?        Ss     0:00 /bin/su -c /usr/bin/perl -w /spider/perl/cluster.pl sysop
 2704 ?        Ss     0:00 sh -c /usr/bin/perl -w /spider/perl/cluster.pl
 2705 ?        S      0:01 /usr/bin/perl -w /spider/perl/cluster.pl
 5007 ?        S      0:00 kissattach /dev/ttyUSB0 ax0
 5430 ?        S      0:00 kissattach /dev/ttyUSB1 ax1
 5494 pts/2    S+     0:00 listen -acirt
 5498 pts/1    S      0:00 kissnetd -p 2
 5505 ?        S      0:00 kissattach -l /dev/pts/3 ax2 44.137.31.73
 5516 pts/1    S      0:00 kissnetd -p 2
 5523 ?        S      0:00 kissattach -l /dev/pts/5 ax3 44.137.31.73
 5534 pts/1    S      0:00 socat -d -d -ly PTY,link=/dev/ttyq1 PTY,link=/dev/ptyq1
 5536 pts/1    S      0:00 slattach -s 38400 -p slip /dev/ptyq1
 5549 pts/1    S      0:00 socat -d -d -ly PTY,link=/dev/ttyq2 PTY,link=/dev/ptyq2
 5554 ?        S      0:00 kissattach -m 256 /dev/ptyq2 ax4 44.137.31.73
 5561 ?        S      0:00 ax25udp -c /etc/ax25/ax25ipd-10093.conf
 5564 pts/1    S      0:00 socat -d -d -ly PTY,link=/dev/ttyq3 PTY,link=/dev/ptyq3
 5569 ?        S      0:00 kissattach -m 256 /dev/ptyq3 ax5 44.137.31.73
 5574 ?        S      0:00 ax25ipd -c /etc/ax25/ax25ipd-axip.conf
 5579 pts/1    S      0:00 socat -d -d -ly PTY,link=/dev/ttyq4 PTY,link=/dev/ptyq4
 5585 ?        S      0:00 kissattach -m 256 /dev/ptyq4 ax6 44.137.31.73
 5606 pts/1    S      0:00 ./linuxnet
 5607 pts/1    S      0:00 ./rstatrxd /var/www/cgi-bin/postat/
 5616 ?        S      0:00 beacon -c PI1LAP-15 -t 10 -d ID ax3 Network node PI1LAP-15 Zeeland, JO11VN
 5617 ?        S      0:00 beacon -c PI1LAP-15 -t 10 -d ID ax2 Network node PI1LAP-15 Zeeland, JO11VN
 5618 ?        S      0:00 beacon -c PI1LAP-15 -t 10 -d ID ax0 Network node PI1LAP-15 Zeeland, JO11VN
 5619 ?        S      0:00 beacon -c PI1LAP-15 -t 10 -d ID ax1 Network node PI1LAP-15 Zeeland, JO11VN
 5620 ?        S      0:00 /usr/local/sbin/ax25d
 5622 ?        S      0:00 /usr/local/sbin/mheardd
 5624 pts/1    S      0:00 /usr/local/sbin/ax25rtd
 5626 ?        S      0:00 /usr/local/sbin/flexd
 5628 ?        S      0:00 /usr/local/sbin/netromd -c -i -p 1 -t 15
 5636 pts/1    S      0:00 /bin/bash /usr/local/sbin/fbb -s -a
 5638 pts/1    S      0:00 /usr/local/sbin/xfbbd -s -a

 

iptables allow traceroute / axip / rip protocol

Posted onAuthorPD9QLeave a comment

#!/bin/bash
ipt="/sbin/iptables"
$ipt -P INPUT DROP
$ipt -P FORWARD DROP
$ipt -P OUTPUT ACCEPT
# Ampr.org
# Port 520 RIP,Routing protocol
$ipt -A INPUT -p udp --dport 520 -j ACCEPT
# Allow traceroute. Je moet de udp poort 33434 en 33523 niet droppen. Een reject is goed.
# Als je hem dropt wordt een traceroute niet mogelijk
$ipt -A INPUT -p icmp --icmp-type 8 -j ACCEPT
$ipt -A INPUT -p udp --dport 33434:33523 -j REJECT
# Proto 4 = IPv4 encapsulation / Proto 93 = ax.25 / Proto 94 = IPIP
# Hier wordt alles toegelaten van en naar het 44 netwerk.
# Wil je alleen het 44net toelaten
# $ipt –I INPUT –s ACCEPT –s 44.0.0.0/8 –d 44.0.0.0/8
#
$ipt -I INPUT -j ACCEPT -s 44.0.0.0/8 -d 0.0.0.0
$ipt -I INPUT -j ACCEPT -s 0.0.0.0 -d 44.0.0.0/8
$ipt -I FORWARD -j ACCEPT -s 44.0.0.0/8 -d 0.0.0.0/0
$ipt -I FORWARD -j ACCEPT -s 0.0.0.0/0 -d 44.0.0.0/8
$ipt -I INPUT -j ACCEPT --proto 4
$ipt -I INPUT -j ACCEPT --proto 93
$ipt -I INPUT -j ACCEPT --proto 94
$ipt -I FORWARD -j ACCEPT --proto 4
$ipt -I FORWARD -j ACCEPT --proto 94
$ipt -I FORWARD -j ACCEPT --proto 93

 

fbb start file for linux

Posted onAuthorPD9QLeave a comment

Fbb start file

#! /bin/bash
### BEGIN INIT INFO
# Provides:          F6FBB Start-up
# Required-Start:    $remote_fs $syslog $network
# Required-Stop:     $remote_fs $syslog $network
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: FBB start up
# Description:       This script provides the start/stop control
#                    for the FBB BBS Packet Radio BBS.
### END INIT INFO

export PATH=/bin:/usr/bin:/sbin:/usr/sbin:/usr/local/bin:/etc/ax25:/usr/local/etc/ax25:/usr/local/xnet

base=${0##*/}
link=${base#*[SK][0-9][0-9]}

test $link = $base && START_FBB=yes
test "$START_FBB" = yes || exit 0
test -x /usr/local/sbin/fbb || exit 0

return="Done"
case "$1" in
start)
        echo "Starting FBB daemon "
        if [ -f /usr/local/etc/ax25/fbb/fbb.conf ] ; then
                /usr/local/sbin/fbb -s -a -l /etc/ax25/fbb.log || return=$rc_failed
        else
                echo  "/usr/local/etc/ax25/fbb/fbb.conf file not found"
                return="Failed"
        fi
        echo  " $1 $return"
        ;;
stop)
        echo "Shutting down FBB script"
        killall -KILL fbb || return="Failed"
        echo "Shutting down FBB daemon"
        killall -KILL xfbbd || return="Failed"
        sleep 4
        echo  " $1 $return"
        ;;
restart|reload)
        $0 stop && $0 start
        ;;
status)
        echo -n "Checking for FBB daemon: "
        PID=`/bin/pidof -x xfbbd`
        if [ -n "$PID" ]; then
                echo  "FBB is up"
         else
                echo "No FBB daemon"
        fi
        ;;


*)
        echo "Usage: $0 {start|stop|status|restart}"
        exit 1
esac

exit 0

ax25 start file

Posted onAuthorPD9QLeave a comment

Ax25 start file die ik gebruik voor pi1lap/pi8lap/pd2lt
(nog toe te voegen start/stop/status)

#!/bin/sh
# Start AX25/Netrom networking daemons.
# Script written and modified by Niels pd2lt
# Date of last modification: 03-11-2017

### BEGIN INIT INFO
# Provides:       ax25
# Required-Start: $network $remote_fs $syslog
# Required-Stop:  $network $remote_fs $syslog
# Default-Start:  2 3 4 5
# Default-Stop:   0 1 6
# Description:    AX25 server
### END INIT INFO

set +e   # Don't exit on error status

PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/xnet:/usr/local/etc/ax25

DESC="AX25 server"

ENABLED=1

        modprobe mkiss
        modprobe ax25
        modprobe netrom
        modprobe rose


        # Dual port TNC KPC-9612
        mkiss -s 9600 -x 2 /dev/ttyUSB0 > /tmp/unix98
        export PTS0=`more /tmp/unix98 | grep -w /dev | cut -b -11`
        export PTS1=`more /tmp/unix98 | grep -w /dev | cut -b 12-`
        sleep 1
        # Port 1k2 144.850Mhz
        kissattach $PTS0 ax0 > /tmp/ax25-config.tmp
        awk '/device/ { print $7 }' /tmp/ax25-config.tmp > /tmp/ax25-config-tmp
        read Device < /tmp/ax25-config-tmp

        ifconfig $Device 44.137.31.73 netmask 255.255.255.224
        sleep 2
        # Port 9k6 430.950Mhz
        kissattach $PTS1 ax1 > /tmp/ax25-config.tmp
        awk '/device/ { print $7 }' /tmp/ax25-config.tmp > /tmp/ax25-config-tmp
        read Device < /tmp/ax25-config-tmp

        ifconfig $Device 44.137.31.73 netmask 255.255.255.224
        sleep 5

        # attach rose port
        rsattach rose0
        ifconfig rose0 44.137.31.73 netmask 255.255.255.224
        rsparms -call PI1LAP-10

        # link local pi8lap (xnet)
        tmpfile="/tmp/$$.startax2.pts"
        kissnetd -p 2 > "$tmpfile" &
        sleep 2
        attachthem () {
                read PTS1 PTS2
                kissattach -l $PTS1 ax2 44.137.31.73
                ifconfig ax2 44.137.31.73 netmask 255.255.255.224 up
                sleep 1
                sed -i "s,attach sdev3 kiss 3 1 19200 /dev/.*$,attach sdev3 kiss 3 1 19200 $PTS2," /usr/local/xnet/AUTOBOOT.NET
        }

        tail -n 1 $tmpfile | attachthem
        rm $tmpfile
        sleep 3

        # Link local pi1lap-4 (xnet)
        tmpfile="/tmp/$$.startax3.pts"
        kissnetd -p 2 > "$tmpfile" &
        sleep 2
        attachthem () {
                read PTS1 PTS2
                kissattach -l $PTS1 ax3 44.137.31.73
                ifconfig ax3 44.137.31.73 netmask 255.255.255.224 up
                sleep 1
                sed -i "s,attach sdev4 kiss 4 1 19200 /dev/.*$,attach sdev4 kiss 4 1 19200 $PTS2," /usr/local/xnet/AUTOBOOT.NET
        }

        tail -n 1 $tmpfile | attachthem
        rm $tmpfile
        sleep 3

        # create slip link Linux <-> Xnet
        socat -d -d -ly PTY,link=/dev/ttyq1 PTY,link=/dev/ptyq1 &
        sleep 2
                slattach -s 38400 -p slip /dev/ptyq1 &
                sleep 1
                ifconfig sl0 44.137.31.69 netmask 255.255.255.255 pointopoint 44.137.31.70 mtu 236 up
                sleep 1

        # create axudp device
        socat -d -d -ly PTY,link=/dev/ttyq2 PTY,link=/dev/ptyq2 &
        sleep 2
                kissattach -m 256 /dev/ptyq2 ax4 44.137.31.73
                ax25udp -c /etc/ax25/ax25ipd-10093.conf > /tmp/axudp
                ifconfig ax4 44.137.31.73 netmask 255.255.255.224 up
        sleep 1

        # create axip device
        socat -d -d -ly PTY,link=/dev/ttyq3 PTY,link=/dev/ptyq3 &
        sleep 2
                kissattach -m 256 /dev/ptyq3 ax5 44.137.31.73
                ax25ipd -c /etc/ax25/ax25ipd-axip.conf > /tmp/axip
                ifconfig ax5 44.137.31.73 netmask 255.255.255.224 up
        sleep 1

        # create socat device (jnos-uro)
        socat -d -d -ly PTY,link=/dev/ttyq4 PTY,link=/dev/ptyq4 &
        sleep 2
                kissattach -m 256 /dev/ptyq4 ax6 44.137.31.73
                ifconfig ax6 44.137.31.73 netmask 255.255.255.224 up
        sleep 1

        # MFnos running in DOSEmu
        # Set the comport in de file /etc/dosemu/dosemu.comf $_com1 = "dev/ttyq5"
        #socat -d -d -ly PTY,link=/dev/ttyq5 PTY,link=/dev/ptyq5 &
        #       slattach -n -q -p slip -s 38400 /dev/ptyq5 &
        #sleep 2
        # KISS inteface for MFnos / slip
        #       kissattach /dev/ptyq5 ax6 44.137.31.73
        #       kissparms -p ax6 -c 1 -f y -t 10 -s 100 -r 255
        #       axparms -setcall ax6 pi1lap-10
        #
        #       ifconfig ax3 44.88.0.9 netmask 255.255.255.224 up
        #sleep 2

        # create nr0 device (lapuro/pi1lap-5) uronode
                ifconfig nr0 down
                nrattach -i 44.137.31.73 -m 512 nr0
                ifconfig nr0 44.137.31.73 netmask 255.255.255.224 hw netrom PI1LAP-5 up

        # create nr1 device (lapbbs/pi8lap) f6fbb
                ifconfig nr1 down
                nrattach -i 44.137.31.73 -m 512 nr1
                ifconfig nr1 44.137.31.73 netmask 255.255.255.224 hw netrom PI8LAP up

        # create nr2 device (lapdx/pi1lap-4) dxspider
                ifconfig nr2 down
                nrattach -i 44.137.31.73 -m 512 nr2
                ifconfig nr2 44.137.31.73 netmask 255.255.255.224 hw netrom PI1LAP-4 up

        # create nr3 device (lappac/pi1lap-7) fpac
                ifconfig nr3 down
                nrattach -i 44.137.31.73 -m 512 nr3
                ifconfig nr3 44.137.31.73 netmask 255.255.255.224 hw netrom PI1LAP-7 up

        # start xnet
        cd /usr/local/xnet
        rm *.CFG &> /dev/null
        sleep 2
        ./linuxnet < /dev/tty2 > /dev/tty2 2>&1 &
        ./rstatrxd /var/www/cgi-bin/postat/ &> /dev/null &
        sleep 2

        # route
        # Xnet route
        ip route add 44.137.31.70 dev sl0 table 44 src 44.137.31.69
        # Mfnos route to 192.168.1.110
        #route add 44.137.31.75 gw 192.168.1.112

        # beacons
        beacon -c PI1LAP-15 -t 10 -d  ID ax0 "Network node PI1LAP-15 Zeeland, JO11VN" &
        beacon -c PI1LAP-15 -t 10 -d  ID ax1 "Network node PI1LAP-15 Zeeland, JO11VN" &
        beacon -c PI1LAP-15 -t 10 -d  ID ax2 "Network node PI1LAP-15 Zeeland, JO11VN" &
        beacon -c PI1LAP-15 -t 10 -d  ID ax3 "Network node PI1LAP-15 Zeeland, JO11VN" &

        # start ax25 deamons
        /usr/local/sbin/ax25d
        /usr/local/sbin/mheardd
        /usr/local/sbin/ax25rtd
        /usr/local/sbin/flexd
        /usr/local/sbin/netromd -c -i -p 1 -t 15
        fbb -s -a -l /etc/ax25/fbb.log

ax25ipd-axip.conf

Posted onAuthorPD9QLeave a comment

On my system i use axip and axudp. I start ax25ipd twice with different configuration files.

Example for a axip port

Start
ax25ipd -c /etc/ax25/ax25ipd-axip.conf

# ax25ipd configuration file Axip
#
socket ip
mode tnc
mycall pi1lap-9
device /dev/ttyq3
speed 19200
#
# loglevel 0 - no output
# loglevel 1 - config info only
# loglevel 2 - major events and errors
# loglevel 3 - major events, errors, and AX25 frame trace
# loglevel 4 - all events
# log 0 for the moment, syslog not working yet ...
#
loglevel 2
broadcast NODES

route n1uro 44.x.x.x b
route pi1bdg 44.x.x.x b

 

ax25ipd-10093.conf

Posted onAuthorPD9QLeave a comment

On my system i use axip and axudp. I start ax25ipd twice with different configuration files.

Example for a axudp port on 10093

Start
ax25ipd -c /etc/ax25/ax25ipd-10093.conf

# ax25ipd configuration file 10093 udp
#
socket udp 10093
mode tnc
mycall pi1lap-8
device /dev/ttyq2
speed 19200
#
# loglevel 0 - no output
# loglevel 1 - config info only
# loglevel 2 - major events and errors
# loglevel 3 - major events, errors, and AX25 frame trace
# loglevel 4 - all events
# log 0 for the moment, syslog not working yet ...
#
loglevel 2
broadcast NODES

route sv1cmg-4 44.x.x.x udp 1093 b
route pd2lt-8 44.x.x.x udp 10093 b

ax25d.conf

Posted onAuthorPD9Q2 Comments

ax25d.conf example file

# /etc/ax25/ax25d.conf
#
# ax25d Configuration File.
#
# AX.25 Ports begin with a '['.
#
[pi1lap-15 via ax0]
parameters      7   4   *  *  *  *  *
NOCALL          *   *   *  *  *  *  L
default         7   2   2  60  300  5  -   root /usr/local/sbin/uronode uronode
#
[lapuro via ax0]
parameters      7   4   *  *  *  *  *
NOCALL          *   *   *  *  *  *  L
default         7   2   2  60  300  5  -   root /usr/local/sbin/uronode uronode
#
[pi1lap-15 via ax1]
parameters      7   4   *  *  *  *  *
NOCALL          *   *   *  *  *  *  L
default         7   2   2  60  300  5  -   root /usr/local/sbin/uronode uronode
#
[lapuro via ax1]
parameters      7   4   *  *  *  *  *
NOCALL          *   *   *  *  *  *  L
default         7   2   2  60  300  5  -   root /usr/local/sbin/uronode uronode
#
[pi1lap-15 via ax2]
parameters      7   4   *  *  *  *  *
NOCALL          *   *   *  *  *  *  L
default         7   2   2  60  300  5  -   root /usr/local/sbin/uronode uronode
#
[lapuro via ax2]
parameters      7   4   *  *  *  *  *
NOCALL          *   *   *  *  *  *  L
default         7   2   2  60  300  5  -   root /usr/local/sbin/uronode uronode
#
[pi1lap-15 via ax3]
parameters      7   4   *  *  *  *  *
NOCALL          *   *   *  *  *  *  L
default         7   2   2  60  300  5  -   root /usr/local/sbin/uronode uronode
#
[lapuro via ax3]
parameters      7   4   *  *  *  *  *
NOCALL          *   *   *  *  *  *  L
default         7   2   2  60  300  5  -   root /usr/local/sbin/uronode uronode
#
[pi1lap-15 via ax4]
parameters      7   4   *  *  *  *  *
NOCALL          *   *   *  *  *  *  L
default         7   2   2  60  300  5  -   root /usr/local/sbin/uronode uronode
#
[lapuro via ax4]
parameters      7   4   *  *  *  *  *
NOCALL          *   *   *  *  *  *  L
default         7   2   2  60  300  5  -   root /usr/local/sbin/uronode uronode
#
[pi1lap-15 via ax5]
parameters      7   4   *  *  *  *  *
NOCALL          *   *   *  *  *  *  L
default         7   2   2  60  300  5  -   root /usr/local/sbin/uronode uronode
#
[lapuro via ax5]
parameters      7   4   *  *  *  *  *
NOCALL          *   *   *  *  *  *  L
default         7   2   2  60  300  5  -   root /usr/local/sbin/uronode uronode
#
[PI1LAP-7 via ax0]
NOCALL * * * * * * L
default    * * * * * * -    root /usr/local/sbin/fpacnode fpacnode -q %S
#
[LAPPAC via ax0]
NOCALL * * * * * * L
default    * * * * * * -    root /usr/local/sbin/fpacnode fpacnode -q %S
#
[PI1LAP-7 via ax1]
NOCALL * * * * * * L
default    * * * * * * -    root /usr/local/sbin/fpacnode fpacnode -q %S
#
[LAPPAC via ax1]
NOCALL * * * * * * L
default    * * * * * * -    root /usr/local/sbin/fpacnode fpacnode -q %S
#
[PI1LAP-4 via ax0]
parameters    2 1   6  900 *  15  0
NOCALL *  *  *  *  *  *  L
default  * * * * * *  - sysop /spider/src/client client %s ax25
#
[LAPDX via ax0]
parameters    2 1   6  900 *  15  0
NOCALL *  *  *  *  *  *  L
default  * * * * * *  - sysop /spider/src/client client %s ax25
#
[PI1LAP-4 via ax1]
parameters    2 1   6  900 *  15  0
NOCALL *  *  *  *  *  *  L
default  * * * * * *  - sysop /spider/src/client client %s ax25
#
[LAPDX via ax1]
parameters    2 1   6  900 *  15  0
NOCALL *  *  *  *  *  *  L
default  * * * * * *  - sysop /spider/src/client client %s ax25
#
[PI1LAP-4 via ax2]
parameters    2 1   6  900 *  15  0
NOCALL *  *  *  *  *  *  L
default  * * * * * *  - sysop /spider/src/client client %s ax25
#
[LAPDX via ax2]
parameters    2 1   6  900 *  15  0
NOCALL *  *  *  *  *  *  L
default  * * * * * *  - sysop /spider/src/client client %s ax25
#
[PI1LAP-4 via ax3]
parameters    2 1   6  900 *  15  0
NOCALL *  *  *  *  *  *  L
default  * * * * * *  - sysop /spider/src/client client %s ax25
#
[LAPDX via ax3]
parameters    2 1   6  900 *  15  0
NOCALL *  *  *  *  *  *  L
default  * * * * * *  - sysop /spider/src/client client %s ax25
#
#
# NET/ROM Ports begin with a '<'.
#
#
<nr2>
parameters 1  10 * * * * *
NOCALL     *  *  * * * * L
default    *  *  * * * * - sysop /spider/src/client client %s ax25
#
<nr0>
parameters 1  10 * * * 3 *
NOCALL     *  *  *  *  *  *  L
default    *  *  *  *  *  *  0  root  /usr/local/sbin/uronode  uronode
#
<nr1>
default  * * * * * *  * root  /usr/local/sbin/xfbbC -c  -i %S
#
<nr3>
parameters      1       10      *       *       *       *       *
NOCALL          *       *       *       *       *       *       L
default    * * * * * * -    root /usr/local/sbin/fpacnode fpacnode -q %S
#
{PI1LAP-15 via rose0}
default  * * * * * *   0    root /usr/local/sbin/uronode uronode