BPQ32 Example SCS Tracker (1k2 packet) port

Example for a SCS Tracker with 1k2 packet port.

PORT
    PORTNUM=1
    ID=VHF 2m Port
    COMPORT=/dev/ttyUSB0       ;COM Port Address
    SPEED=38400                ;COM Port Speed
    DRIVER=TRKMULTI
 
    QUALITY=0                  ;Setting to 0 stops node broadcasts on this port
    MINQUAL=168
 
    MHEARD=N
    PACLEN=128                 ;Max = 236 if using NETROM links
     
    CONFIG                     ;Driver-Specific Configuration
    ;DEBUGLOG 1
    PACKETCHANNELS 5           ;Limit to 5 simultaneous connections
    R 0                        ;Digipeating OFF
    F 500                      ;T1 - FRACK: in 10mS steps.
    @T2 0                      ;T2 - RESPDELAYTIME: in 10mS steps.
    @T3 18000                  ;T3 - Sign of life timer in 10mS steps
    N 10                       ;RETRY: Setting to 10
    O 7                        ;MAXFRAME: Setting to 7
    T 50                       ;TXDELAY: Setting to 1/2 second (50 * 10ms)
    P 32                       ;Persistence (p) (default 32)
    W 10                       ;Slottime in milliconds (default 10)
    %N 0                       ;TXTAIL - in 10ms increments.
    ; Comment out the desired speed.
    %B 1200            ;1200 is the poweron default, but setting it anyway.
    %F 2000            ;I assume this has no effect on 1200 mode, but setting anyway..
    %XA 880            ;Set 300/1200 output amplitude to 3 kHz Peak deviation per measurement.
    %XF 1600           ;Set 9600/19k2 output amplitude to 400 mV PP per ID-880H manual.
    %E 2               ;Set lower tone in 1200 mode (fw 1.5s) to 1/2 voltage 6 dB down from high.
ENDPORT